Each instruction is executed in one clock cycle.
Instructions are inputed on io_in[2:7].
After reset, registers will initialize, in order of ascending address, to 00000000b, 00000001b, 00000010b, 00000011b
No absolute requirements but external memory and hardware for addressing is not a bad idea
| # | Input | Output |
|---|---|---|
| 0 | clock | bit zero of hardwired output reg number at address 11b or pc |
| 1 | reset | bit one of hardwired output reg number at address 11b or pc |
| 2 | opcode bit zero | bit two of hardwired output reg number at address 11b or pc |
| 3 | opcode bit one | bit three of hardwired output reg number at address 11b or pc |
| 4 | result reg address bit zero | bit four of hardwired output reg number at address 11b or pc |
| 5 | result reg address bit one | bit five of hardwired output reg number at address 11b or pc |
| 6 | non result operand reg address bit zero | bit six of hardwired output reg number at address 11b or pc |
| 7 | non result operand reg address bit one | bit seven of hardwired output reg number at address 11b or pc |